2.5" into 3" Turbo Back Performance Exhaust
200 Series Landcruiser Performance Exhaust
Twin 2.5" into 3" Exit Exhaust
Performance Gains: 16KW / 81NM
Torqit's 200 Series twin 2.5" into a 3" exit Performance Exhaust is an entry level system. The exhaust will provide good power gains and note. The exhaust bolts onto the back of the turbo. This system has blue titanium dump pipes to help with heat dispersion and lower EGT's.
Thick Stainless Steel
All Torqit exhausts have a thickness up to 2mm. This thickness produces a deeper note without cabin drone. Torqit exhaust systems are one of the thickest mandrel bent exhausts in Australia. Due to the thickness, it is extremely difficult to crack, so you can go off road with peace of mind that your system will stay intact.
304 Grade Stainless Steel
304 grade stainless steel is the highest quality material used for exhaust systems. The premium steel will not rust and is much stronger than 409 grade stainless. Our high quality steel produces a deep note and guarantees extreme strength even in the toughest terrain.
Internal & External Welds
All Torqit Performance Exhausts have internal and external welds to increase the strength of the exhaust system. The reinforced system makes it extremely difficult to crack, even in tough off-road applications.
Mandrel Bent System
Mandrel bending supports the exhaust pipe from the inside as it is bent, this prevents crinkling of the pipe. The results are smooth and constant-diameter bends that reduce restriction and improve both the performance and efficiency of your engine.
Titanium Coated Dump Pipes
The titanium coating on these dump pipes helps with heat dispersion, keeping your engine bay cooler and protecting your engine and its components.
High Flow Diesel Catalytic Converter
Our exhaust systems focus on increasing flow capacity to allow the engine to breath more freely. An increase in flow means the cat has to work harder and faster. Our high flow diesel specific cat is more efficient and will yield an increase in horsepower and overall performance.
Double Braided Flex Bellows
The flex bellows allows for movement on the vehicles chassis, this extra movement means the exhaust system will not crack. The double braid is twice as reinforced, and will not allow gas to escape.
All Torqit performance exhaust systems are completely Do It Yourself bolt together, which means you wont need a hoist to complete fitment.
- 10 year warranty
- Up to 2mm thick steel, approximately 1.7mm on bends
- 304 grade 2B finished stainless steel
- Titanium coated dump pipes
- Internal and external welding on all flanges for extra strength
- Double braided flex bellow
- High flow diesel spec catalytic converter
- Heavy duty wrap around brackets
- 2 & 3 bolt 10mm laser cut flanges
- Twin designed pyrometer fitting to suit EGT/AFR fittings